New lampies

Not content to tumble just my porcelain beads - I have been tumbling glass beads as well. I know a few lampworkers use this techinque instead of etching to create beads with a 'sea glass' effect, but I wanted more of and 'etched' effect - without the chemicals.
I put them in with the porcelain beads, together with some tumbled stones and some polishing compound as an experiment and I am very pleased with the result. You can see that the 'shine' has been taken off and the beads have a very pleasing matt surface now. I think it makes the details and delineation between the colours and the reaction lines much crisper. The are a few nooks and crannies that the polishing compound just doesn't get to, but overall a success I think.







I also managed some torch time this week. I got hold of some CIM Sangre and gave it a go. A very nice red, but I think I need to practise 'stricking' it a bit more - you can still see some orangy/yellow on some of the red beads. For those that don't know what stricking is - some glasses only form their colour if they are worked then cooled and then heated again. Perhaps after they have been annealled they colour will improve. I will certainly be making some more with this lovely glass.
Also been playing with pinks and mauves. Practising encasing and inclusions. I have created champange bubbles in the two beads with murrini and the mauve lentil next to them. The results are still a bit hit and miss - but at least they didn't crack.
I also used my own 'home made' bead release for these beads and I am very pleased with the results. The beads came off the mandrels very easily, and the holes cleaned up a treat with a run under the cold tap and a gentle scrub with pipe cleaner. There are a couple of bits that need a bit of a scrap at or a soak perhaps and they should then be as clean as a whistle. I flame dried the release without any problems, after double dipping the mandrels. Got a few cracks, but not near where I was working - may try a slightly modified recipe to see if I can stop the cracking.

Goddess Beads

I have been experimenting with Goddess Beads. These are a quite popular type of bead based on various goddess, but mostly the Venus of Wilendorf. It is believed that the beads were made by women in rituals related to fertility.

After several failed attempts to fashion something that I found even remotely pleasing I decided to try 'pulling' the clay. For those of you that are experienced with pottery making, this is how you make handles for mugs etc.

One of the reasons I went for pulling was that porcelain dries and cracks really quickly - and with the weather being so hot and dry when I was making them it was proving a thankless task to hand mould them.

So small lumps of clay were roughly shaped and then pulled/coaxed into shape over a bowl and using liberal amounts of water. They were then left to stiffen up a little and the breasts were applied and moulded in and the details sgrafitto'ed in with a pointy tool.

Fired then tumbled. The tumbling taks off almost all the making marks etc, and some of the detail. The result is silky smooth and warm. Glazes put such a hard and brittle barrier between you and the clay. Though I may well try some of these glazed as well.

I have listed a couple of these on my Etsy shop - and I think one may well be used as a Blog giveaway soon!

Etsy Treasury

Today someone featured some of my beads in a Treasury on Etsy. And I am absolutely delighted. It is the first time I have been included in a treasury (to my knowledge). There are some delishiously English items featured in this Treasury which is called 'Made in England.

Treasuries expire after a few days - so be quick and follow the link to take a look.

http://www.etsy.com/treasury/4c3457a3da918ddf456906f/made-in-england

New lampwork

Having recently aquired a new but 2nd hand lentil press I have set to experimenting, after getting my torch set up that is.

Starting with the lush turquoise and ivory effetre glasses I made a few beads and then got to work with the press. First one is on the bottom left of the picture - and I think it must have been beginner's luck!

Then moved on a bit to try some other techniques. I have got myself some murrini and some brass mesh. I have been practising using the mesh as an inclusion encased in clear, and the idea is that when heated enough it creates bubbles that look like champange bubbles. This worked best on the one that cracked - sod's law. I guess I just didn't get the others quite hot enough. I will get the hang of this sooner or later!

Other than that I have been busy updating my Etsy shop, adding new stock and posting much improved photos. Go on over and take a look.

Back soon,

Terri

I'm still here!!

I know...a very long absence. I have moved house and am still in a bit of a muddle but getting there but have not got set up for ceramics and lampwork yet.

I have started making again. I have been experimenting with some polymer clay. I decided to enter the monthly competition on the Making Jewellery magazine forum. Taking inspiration from the picture published there I have come up with these beads. Working from the elements that I found the most interesting - the colours and the textures. The brief does say that you should make something 'wearable' and I suppose in that respect I have not entirely fulfilled it - but they are in my opinion potentially wearable.

I will be getting the polymer clays out again soon. I enjoy the immediate results you get with polymer clays. Yes they have to be baked, sanded and perhaps varnished but compared to ceramics this is all so quick - packet to bead in less than an hour. I suppose then you could even make the bead, then the jewellery and wear it tonight!

I have been developing a load of ideas for my ceramic beads, which has now started a train of thought towards making some trinket boxes and even larger ceramic items. This is quite exciting as I haven't really make any ceramics of this type for a long time. I am looking forward to getting stuck in. I suppose I will have to start a seperate blog for them - lol.

Moving on from bead making and ceramics I have been busy with a commission for a tiara. I have never made one before, but here it is. Crystals and freshwater pearls. I am happy with it........but the bride has not seen it yet. I hope she is happy with it. It's for my daughter's friend. My daughter thinks it won't be bold enough to stand out against the bride's blonde hair, but I think the sparkle from the Swarovski ABs should do the job - especially if they get a sunny day. I am sure I can alter it a bit if necessary.

Well that's all for now folks. I will be back soon with lots of new work and news of a new competion.

New Beads

It's been very quiet around this blog recently - sorry! I have been involved in organising our house move and the laptop has gone away for repairs so I have dug out an old and very slow one to use for now.

Have been making beads though - lampwork and porcelain. Only have photo's of the lampwork for now though. I have been trying a number of techniques - and failing miserably with many. But there are some worthy of showing to the world. I have been playing around with encasing and making tablets/lentils. No presses - just flattening them against a metal surface. I like the 'organic' quality of the shapes this gives and has nothing at all to do with the fact that I don't own any bead presses - lol! No really I do like working in this way and really do like the results.

Also been making more of the red and yellow daisy beads and some new floral designs. These beads are much more sculptural than the tablets. Not sure working with two very different techinques at the same time is a really good idea - but I enjoy the challenge.

Made a load of porcelain beads as well, but not been able to get them photographed yet - so watch this space.

Bye for now

Terri

I have added my voice to the Crafts Council's latest campaign to raise the profile of Crafts in the UK.


Their site says, "Craft Matters was launched in October 2009 to encourage people to stand up and be counted as supporters of contemporary craft and tell us why it is important to them."


Over 6000 people have supported them so far. Go along and take a look, even if you choose to not leave a quote yourself you will see it is full of amazing affirmations about the power crafts has in people's lives.


Here is the link: http://www.craftmatters.org.uk/


Or click on the big orange button.

Bye for now

Terri